Category : Exhaust Fan For Bathroom

Why It’s Important Exhaust Fan Sones

Learn all about bathroom exhaust fan sones and their importance when selecting a fan. Discover how to choose the right fan for your needs based on sone ratings and CFM, and find out what noise level is acceptable for a bathroom fan.

Left side of picture Blue led light Exhaust Fan and other side written "What Are Exhaust Fan Sones And Why It's Important To Know to" and logo "bathinhouse'

When choosing a bathroom exhaust fan, it’s important to consider the appropriate number of sones for your needs.

Sones are a unit of measurement used to quantify the level of sound produced by a fan. The ideal number of sones depends on your preferences for noise level and the size of your bathroom.

The appropriate number of sones for a bathroom exhaust fan depends on your preferences for noise level and the size of your bathroom. Here’s a general guideline:

  1. Quiet Fans (0.5 – 1.0 Sones): If you want a quieter bathroom and have a small bathroom, think about getting a fan with a lower noise rating, usually between 0.5 to 1.0 sones. These fans work quietly or make very little noise.
  2. Moderate Fans (1.0 – 2.0 Sones): For a balance between noise level and performance, fans with a sone rating between 1.0 to 2.0 are suitable for most bathrooms. They provide adequate ventilation without being overly noisy.
  3. Standard Fans (2.0 – 4.0 Sones): In larger bathrooms or where noise isn’t a primary concern, you can opt for a fan with a sone rating in the 2.0 to 4.0 range. These are more powerful but may be noisier.
  4. High-Performance Fans (4.0+ Sones): If you have a particularly large bathroom or require rapid ventilation, you might consider a high-performance fan with a sone rating of 4.0 or higher. These can be louder but move air more effectively.

However, it’s also crucial to ensure the fan is appropriately sized for your bathroom in terms of airflow capacity (measured in cubic feet per minute, CFM) to provide effective moisture removal.

Why Sones Rating Important in Bathroom Rating?

White color Bathroom Exhaust Fan and logo "bathinhouse"

The comfort and tranquility of your bathroom environment depend on understanding the significance of Sones ratings. These ratings play a critical role in ensuring a soothing and peaceful atmosphere in your bathroom. Here’s why:

  • Quantifying Noise Levels: Sones ratings are a standardized method for quantifying the noise levels generated by exhaust fans. This measurement is crucial in determining the loudness or quietness of a fan during operation.
  • Prioritizing Peace and Quiet: Choosing a bathroom fan with a lower Sones rating can greatly improve your bathroom experience. Lower Sones mean quieter fan operation, making it perfect for those who prefer a peaceful and undisturbed environment.
  • Improving Overall Comfort: A bathroom should be comfortable and relaxing. A fan with lower sones reduces noise, creating a more pleasant environment for grooming, relaxation, and a spa-like experience.
  • Enhanced Living Experience: Lower Sones ratings provide practical benefits and contribute to an enhanced living experience. They create a peaceful and enjoyable bathroom environment, promoting relaxation and well-being.

When choosing a bathroom exhaust fan, the Sones ratings are crucial in determining the noise level generated during operation.

How To Measure Exhaust Fan Noise

Measuring exhaust fan noise is a critical step in ensuring a comfortable and quiet environment in your home. Here’s a detailed guide on how to measure exhaust fan noise, both with professional tools and through a do-it-yourself (DIY) approach:

Professional Measurement:

Sound Level Meter (SLM): The most accurate way to measure exhaust fan noise is by using a sound level meter (SLM). SLMs are specialized devices designed to measure sound levels in decibels (dB).To use an SLM, follow these steps:

  • Place the SLM in the room where the exhaust fan is installed.
  • Turn on the fan to its highest setting.
  • Allow the SLM to record the sound levels over a designated period, typically a few minutes.
  • To measure the noise level of the fan, use a sound level meter (SLM) to get a reading in decibels (dB). You can then refer to the chart below to convert the reading into sones.

DIY Measurement:

If you don’t have access to a professional sound level meter, you can still estimate the noise level of your exhaust fan using a smartphone app and following these DIY steps:

  1. Download a Sound Meter App: To measure exhaust fan noise, download a reliable sound level meter app on your smartphone. There are numerous free and paid options available for iOS and Android devices.
  2. Calibrate the App: To ensure accurate measurements, calibrate the sound level meter app according to its instructions.
  3. Room Preparation: Ensure that the room is as quiet as possible. Turn off other sources of noise, such as TVs or radios.
  4. Fan Operation: To measure the noise level of your exhaust fan, turn it on to its highest setting and let it run for a few minutes until the noise stabilizes.
  5. Measure the Noise: Hold your smartphone with the sound level meter app at a consistent distance from the exhaust fan, typically around one meter. Make sure there are no obstructions between the fan and the phone.
  6. Record the Reading: The app will display the noise level in dB. Record this reading for reference.

When measuring exhaust fan noise using a smartphone app, keep in mind that it may not be as precise as a professional sound level meter. However, it provides a reasonably accurate estimate of the fan’s noise level, helping you assess its impact on your bathroom environment.

Exhaust Fan Sones Chart

The Exhaust fan sones chart tells you how much noise an exhaust fan makes. It is a good idea to choose a lower sone rating for a quieter environment.

128The Sound Of A Refrigerator Humming
237.99A Quiet Office Or Another Professional Environment
343.84A Tv Playing At A Comfortable Volume
447.99A Typical Conversation Between Two People
551.21A Louder, More Active Conversation
653.83A Quieter Restaurant Setting
756.06Light Traffic
857.98The Average Sound Of Traffic

How To Reduce Exhaust Fan Noise

If your bathroom exhaust fan is making too much noise, and you not change into new Quiet Exhauster Fan then you use this two methods below.

  1. Fix Existing Exhaust Fan Noise
  2. Use Exhaust Resonator.

Fix Exhaust Fan Noise:

  1. Clean and Lubricate: Regularly clean the fan components and lubricate the motor according to the manufacturer’s recommendations to help reduce noise caused by dust and debris buildup.
  2. Tighten Loose Parts: Check for any loose screws or fasteners in the fan assembly. Tighten any loose parts to prevent rattling and vibrations.
  3. Balance the Blades: Imbalanced fan blades can generate noise. To rectify this, power off the fan and carefully adjust the blade weights or replace any damaged blades.
  4. Inspect and Replace Bearings: Worn-out bearings can cause a humming or grinding noise. Inspect and replace bearings as needed to ensure smooth operation.
  5. Upgrade to a Quieter Model: If your exhaust fan is old and noisy, consider upgrading to a quieter model. Look for fans with lower Sones ratings for quieter performance.
  6. Install a Duct Silencer: Duct silencers or attenuators can be added to the exhaust ducting to reduce noise transmission. These devices absorb sound waves and decrease noise levels.
  7. Use Flexible Ducting: Rigid ducting can transmit noise more effectively than flexible ducting. Switching to flexible ducting can help reduce noise transmission.
  8. Soundproofing: Add soundproofing materials to the walls or ceiling around the fan to minimize noise transfer to adjacent rooms.

Use Exhaust Resonator Does:

An exhaust resonator is a device typically used in automotive exhaust systems, but its principles can apply to other fans as well. Here’s how an exhaust resonator works:

  • Noise Reduction: An exhaust resonator is designed to reduce noise produced by the exhaust system, including fans. It works by using specific chambers and materials to manipulate sound waves. These chambers create sound wave interference, canceling out certain frequencies and reducing overall noise.
  • Tuning Sound: Resonators are often “tuned” to target specific frequencies associated with exhaust or fan noise. This tuning helps in reducing noise more effectively by addressing the most problematic frequencies.
  • Installation: In an exhaust fan context, an exhaust resonator can be installed in the ducting to help reduce noise. It’s essential to select a resonator that matches the fan’s specifications and the noise frequencies you want to address.

To reduce exhaust fan noise, perform regular maintenance, make adjustments, and consider equipment upgrades if necessary. Clean and lubricate the fan, fix any loose parts, and use duct silencers or soundproofing to minimize noise. Upgrading to a quieter fan model or using exhaust resonators can also target specific noise frequencies and further reduce fan noise.

FAQ: What Are Bathroom Exhaust Fan Sones And Level of Sone Rating

Q1.How strong should a bathroom fan be?

The National Kitchen and Bath Association (NKBA) recommends that bathroom fans have a rating of at least 50 cubic feet per minute (cfm). Additionally, a bathroom fan should be powerful enough to completely replace the air in the bathroom eight times per hour. This means a fan should be capable of moving 8 times its rated cfm, or 400 cfm for a 50 cfm unit.

Q2.What Is The Acceptable Noise Level For The Exhaust Fan?

The acceptable noise level for an exhaust fan is 50 decibels, which is considered the maximum noise level that is both comfortable and safe for humans. If the noise emitted by your exhaust fan exceeds this level, you may want to consider replacing it with a quieter model.

Q3.How Do I Know If My Bathroom Fan Is Strong Enough?

To check the CFM (cubic feet per minute) rating of your fan, look for the sticker on the housing. The CFM rating indicates how much air the fan can move in a minute. Additionally, consider the size of your bathroom and the number of users when selecting a fan.


When choosing a bathroom exhaust fan, it’s important to consider the appropriate number of sones for your needs.

Fans with lower sone ratings, typically between 0.5 to 1.0 sones, create a peaceful and undisturbed atmosphere, perfect for relaxation.

On the other hand, fans with higher sone ratings, ranging from 2.0 to 4.0, offer more power and ventilation but may be noisier.

Regular maintenance and upgrades to quieter models or the use of soundproofing materials can help minimize noise transmission.

By prioritizing the right sone rating, you can achieve a comfortable and tranquil bathroom environment that suits your preferences. This applies to various bathroom areas such as the bathroom showers, bathtubs, toilets, bathroom floors, and bathroom accessories, you can visit our website

Leave a Comment