Different Types of Tub Spouts: A Comprehensive Overview

January 26, 2024

Know about the different types of tub spouts, from wall-mounted to Roman tub fillers, and choose the right one for your bathroom. Read now for a comprehensive overview.

To choose the right bath tub accessories, you need to know the types of tub spouts available, their features, uses, and installation specifics. A tub spout directs water flow and adds style to your space.

There are several types of tub spouts available, including wall-mounted spouts for standard bathtubs, deck-mounted spouts for freestanding or drop-in tubs, Roman tub fillers with long spouts and separate handles, diverter spouts for combination bathtub and shower setups, slip-on spouts for versatility and easy installation, and threaded spouts for secure connections. The height of the tub spout is an important factor to consider when selecting the appropriate type for your bathroom.

By exploring each type’s unique characteristics and applications, you can make an informed decision that aligns with your preferences and bathroom requirements.

Table of Contents

Wall-Mounted Spout:

This type of spout is installed on the wall above the bathtub. It typically extends outward and downward, allowing water to flow into the tub.

Uses: Wall-mounted spouts are commonly used in standard bathtub setups. They are versatile and suitable for most bathrooms.

Special Circumstances: Wall-mounted spouts may only be ideal if you have a freestanding or drop-in bathtub with a wall behind it.

Wall-Mounted Spout Installation:

Determine the location: Measure and mark the desired position for the spout on the wall above the bathtub.
Prepare the pipe: Clean and smooth the end of the pipe protruding from the wall.
Apply plumber’s tape: Wrap the plumber’s tape around the threaded end of the pipe in a clockwise direction to ensure a tight seal.
Attach the spout: Screw the wall-mounted spout onto the threaded pipe by twisting it clockwise until snug. Use a wrench to tighten it gently if necessary.

Wall-Mounted Spout Removal:

Locate the set screw: Look for a set screw on the underside of the spout near the wall.
Loosen the set screw: Use an Allen wrench or screwdriver to loosen the set screw by turning it counterclockwise.
Twist and pull: While holding the spout with one hand, twist it counterclockwise and pull it away from the wall to remove it.

Deck-Mounted Spout:

Deck-mounted spouts are installed directly on the rim or deck of the bathtub. They are often used in freestanding or drop-in bathtubs.

Uses: Deck-mounted spouts are commonly used in freestanding or drop-in bathtubs where the rim or deck can support the spout.

Special Circumstances: If your bathtub has no suitable rim or deck for installation, a deck-mounted spout may not be feasible.

Deck-Mounted Spout Installation:

Determine the location: Measure and mark the desired position on the bathtub’s rim or deck where the spout will be installed.
Prepare the mounting hole: Drill a hole at the marked location, following the manufacturer’s recommended size.
Apply plumber’s putty or silicone: Apply plumber’s putty or silicone around the base of the spout to create a watertight seal.
Insert and secure the spout: Insert it into the mounting hole and secure it from underneath using the provided hardware, such as nuts or screws. Follow the manufacturer’s instructions for proper installation.

Deck-Mounted Spout Removal:

Access the mounting hardware: Look for access panels or covers on the underside of the spout or around the bathtub’s rim.
Remove the mounting hardware: Unscrew or remove any nuts, screws, or bolts securing the spout to the deck or rim.
Twist and pull: Once the mounting hardware is removed, twist the spout counterclockwise and pull it up to detach it from the deck or rim.

Roman Tub Filler:

Roman tub fillers are typically used in larger, more luxurious bathtubs. They consist of a long spout and separate hot and cold water handles. Roman tub fillers are generally deck-mounted or mounted on the tub surround.

Uses: Roman tub fillers are often used in larger, more luxurious bathtubs to provide an elegant and upscale look. They can fill the tub quickly due to their long spouts.

Special Circumstances: A Roman tub filler may be disproportionate and not visually appealing if you have a smaller or standard-sized bathtub.

Roman Tub Filler Installation:

Determine the location: Measure the desired position for the hot and cold water handles and the spout on the deck or tub surround.
Install the handles: Follow the manufacturer’s instructions to install the hot and cold water handles at their locations.
Connect the water supply lines: Connect the hot and cold to the handles according to the manufacturer’s instructions.
Attach the spout: Install the Roman tub spout at the designated location, following the manufacturer’s guidelines. Secure it using the provided hardware.

Roman Tub Filler Removal:

Please turn off the water supply: Locate the shut-off valves for the hot and cold water supply lines and turn them off.
Remove the handles: Depending on the design, remove the handles by unscrewing them or removing any decorative caps or covers.
Access the mounting hardware: Look for screws or nuts holding the spout in place and remove them using appropriate tools.
Twist and lift: Once the mounting hardware is removed, twist the spout counterclockwise and lift it to detach it from the tub.

Diverter Spout:

A diverter spout diverts water flow between the bathtub spout and the showerhead. It usually has a pull-up or lift-up diverter mechanism that directs the water flow.

Uses: Diverter spouts are useful for a combination bathtub and shower setup. They allow you to divert water flow between the spout and the showerhead.

Special Circumstances: A diverter spout may only be necessary if you have a standalone bathtub with a shower setup.

Diverter Spout Removal:

Locate the set screw: Look for a screw on the underside of the spout near the wall or at the base of the spout.
Loosen the set screw: Use an Allen wrench or screwdriver to loosen the set screw by turning it counterclockwise.
Twist and pull: While holding the spout with one hand, twist it counterclockwise and pull it away from the wall to remove it.

Diverter Spout Installation:

Determine the location: Measure and mark the desired position for the diverter spout on the wall above the bathtub.
Prepare the pipe: Clean and smooth the end of the pipe protruding from the wall.
Apply plumber’s tape: Wrap the plumber’s tape around the threaded end of the pipe in a clockwise direction.
Attach the spout: Screw the diverter spout onto the threaded pipe by twisting it clockwise until snug. Use a wrench to tighten it gently if necessary.

Slip-On Spout:

Slip-on spouts are relatively easy to install and compatible with various bathtub setups. They slide onto a pipe that extends from the wall and is secured using a set screw.

Uses: Slip-on spouts are versatile and compatible with various bathtub configurations. They are easy to install and suitable for most standard setups.

Special Circumstances: A slip-on spout may not fit properly if your bathtub has an unconventional or non-standard plumbing setup.

Slip-On Spout Installation:

Prepare the pipe: Clean and smooth the end of the pipe protruding from the wall.
Apply plumber’s tape: Wrap the plumber’s tape around the threaded end of the pipe in a clockwise direction.
Slide on the spout: Slide the slip-on spout onto the pipe until it fits securely. Some slip-on spouts have set screws that need to be tightened to ensure a firm grip.

Slip-On Spout Removal:

Locate the set screw: Look for a screw on the underside of the spout near the wall or at the base of the spout.
Loosen the set screw: Use an Allen wrench or screwdriver to loosen the set screw by turning it counterclockwise.
Twist and pull: While holding the spout with one hand, twist it counterclockwise and pull it away from the wall to remove it.

Threaded Spout:

Threaded spouts have a threaded connection that screws onto a threaded pipe from the wall. They provide a secure and leak-free connection.

Uses: Threaded spouts provide a secure and leak-free connection. They are commonly used in standard bathtub setups with threaded pipes. Special Circumstances: If your bathtub has non-threaded plumbing connections, a threaded spout may not be compatible without modifications.

Threaded Spout Installation:

Prepare the pipe: Clean and smooth the threaded pipe from the wall.
Apply plumber’s tape: Wrap the plumber’s tape around the threaded end of the pipe in a clockwise direction.
Screw on the spout: Twist the threaded spout onto the pipe in a clockwise direction until it is securely tightened. Use a wrench to ensure a snug fit if necessary.

Threaded Spout Removal:

Please turn off the water supply: Locate the shut-off valves for the hot and cold water supply lines and turn them off.
Unscrew the spout: Grip it firmly and twist it counterclockwise to unscrew it from the threaded pipe.
Pull and remove: Once the spout is loose, pull it away from the wall to remove it completely.

Conclusion:

Choosing the right tub spout for your bathroom is an important decision that can affect the space’s functionality and style.

With many types of tub spouts available, each with its unique features uses, and installation specifics, it’s crucial to explore your options and consider your preferences and bathroom requirements.

Whether you have a standard bathtub, a freestanding or drop-in tub, a combination bathtub and shower setup, or need to also know about bathroom showers, bathtubs, toilets, bathroom floors, and bathroom accessories, you can visit our website bathinhouse.com .