Know main six types of Bathtub Drains and how to choose the best one for your needs in this informative post. Includes step-by-step instructions for removing and cleaning different types of drain stoppers.
The main purpose of a bathtub drain stopper is to hold water inside the tub while you bathe in the bathtub, but if for some reason this drain stop does not work or is broken.
If the bathtub drain stack is not working properly when hair gets clogged or broken, dirty water can accumulate inside the bathtub causing various problems such as stains and the growth of harmful bacteria and creating a smelly and damp environment in the bathroom.
In this case we have to open it and clean it again or change it if necessary, we usually want to change it ourselves without the help of a plumber.
The Six Type Drain stopper is :
- Lift and Turn Bathtub Drain Stopper
- Push-and-Pull Drain Stopper
- Toe-Touch Bathtub Drain Stopper
- Flip-It Bathtub Drain Stopper
- Trip Lever Drain Stopper
- Pop-Up Drain Stopper
Bathtub Drain Stopper Types
There are usually Six Types of bathtub drain stoppers
1. Lift and Turn Bathtub Drain Stopper
lift and turn stopper are the most used, the easiest way to recognize the bathtub drain stopper is to have a small raised knot at the top of the cap, which can be used to open and close the cap.
If it rotates clockwise it goes down and close the stopper, and if it turns counterclockwise it rises up and opens.
Set screw help is installed in the center of the thread in the drain pipe. The bottom of this small cap is attached to the top of the set. It stays stiff when it is first attached, making it a little harder to remove.
However, it has the advantage that you can easily remove anything to get rid of hair and other broken things; moreover, it is quite durable, cheap and easy to design.
2. Push-and-Pull Drain Stopper
Although a push & pull is like a lift and turns drain stop in relative terms, the last technique used differs. It has to be pushed down to close it and pulled upwards to open it.
Its installed system is similar, with a set screw attached to the body drain of the pile. With which the top stop-cap stays at the bottom.
It is used by many people, especially those who do not want to use the Lift & Drain Stopper for its rotation method. It requires very little repair due to a special design.
Moreover, if it is opened to remove the drain, it can be opened very easily without any plumber, for which there is no difficulty in removing the tub drain.
3. Toe-Touch Bathtub Drain Stopper
A Toe-Touch stopper is like a push and pull drain stopper but has a slightly advanced level because it has a spring inside, which allows you to open it when you just press it with your toes and close it when you press it again.
For this benefit, you use this drain stopper more, but the spring in it can be used carefully, the longer it can last.
4. Flip-it Bathtub Drain Stopper
This flip-it bathtub drain stopper is also installed in most corner bathtubs also regular bathtubs. Above this drain, the remover is attached to a toggle lever which has helped to be removed to open and closed the drain.
The flip-it bathtub drain stopper has a number of O-rings inside which are taken up with the help of a lever and a waterproof seal is made to lower the water when it is lowered again.
One thing about it is that it is very easy to install and there is no filter under it.
5. Trip Lever Drain Stopper
The trip lever stopper works are usually used for two purposes.
Objective 1: The overflow bathtub has a lever to open the drain which is used to move a plunger up and down, this plunger is hollow and is connected with the help of a tripling rod.
It also has no visible pop-up stops to open this type of drain, only a sieve to keep the water out.
Objective 2: When the booth is full of water through the overflow pipe, it goes out because the plunger is hollow and the bathroom does not get wet after any water.
However, cleaning and repairing these types of drain stoppers if the hair and dirt get stuck for any reason is very difficult and time-consuming.
6. Pop-Up Drain Stopper
This is an attempt to combine the bathtub tip model and the sink of the bathroom. As we know, in the trip model case there is a plumber attached to the lever stop there is a spring attached to the lever rod, with the help of which a rocker’s arm is attached to this pop-up stopper located in the bathtub.
Like the trip-lever stopper, it is fairly inexpensive but has the complexity of installing and cleaning. Due to this, it is very difficult to get rid of hair and dirt.
How to Remove Trip Lever Drain Stopper
Step 1:Open the Stopper and Cover Plate
Remove the cover screws holding the Cover plate, carefully open the cover and lifting the lever, connecting rod linkage and plunger through the overflow tube.
Step 2:Check and Clean the Plunger
Clean all plungers thoroughly with a good cleaner, if any dirt and hair are stuck to them, replace the plunger if it is badly damaged.
Step 3:Fix the Linkage
Adjust the linkage rod if necessary, sometimes it is too long or for some reason, it is not properly connected to the plunger.
Step 4: Preconditioning
The stopper linkage should be inserted from the overflow opening to the cover plate. Run the water and operate and see if the stopper is working properly.
After setting the good check whether it works well with water.
Easy Step on Remove Push-Pull Drain Stoppers
As you already know push pull drain stop is the upgraded version of the lever arm drain stop. There is a spring instead of a plunger, and this spring and the rocker’s arm sometimes get stuck, I will discuss here how to fix this spring.
Step 1: Open the Stopper and Cover Plate
Remove the cover screws holding the cover plate, carefully open the cover and take out the connecting spring and connecting rod through the overflow drain. In an option, the plunger is raised and lowered by twist cover on the overflow plate instead of using a lever.
Step 2: Clean the Spring
Clean all plungers thoroughly with a good cleaner, if any dirt and hair are stuck to them, replace the plunger if it is badly damaged.
Step 3: Fix the Connecting Rod
If the connecting rod needs any adjustment, the spring should be raised so that it works properly when the rocker arm is seen when the trip-lever is opened.
Step 4: Preconditioning
The stopper linkage should be inserted from the overflow opening to the cover plate. Run the water and operate and see if the stopper is working properly.
Choosing a Bathtub Drain Stopper
When choosing a bathtub drain, ensure that it is directly connected to the tub and has an overflow pipe to prevent excess water from spilling onto the bathroom floor.
Keep in mind that building codes may dictate the type of drain you can use, and guidelines and dimensions should also be considered.
If you are also interested in bathroom showers, bathtubs, toilets, bathroom floors, and bathroom accessories, you can visit our website bathinhouse.com.
FAQ: 6 Types of Bathtub Drains: How to Choose the Best
Q1.What Can I Use To Plug My Bathtub Drain?
The easiest and quickest way to plug a bathtub is to fill a plastic bag with water and place it over the open ends of the bathtub drain to seal it.
Q2.What’s the Work of an Overflow Plate?
The overflow cover plate is an important part of the bathtub, it’s main function is to prevent the cover from overflowing when the bathtub is filled with water, and to prevent any damage to the bathroom floor from getting wet.
2 thoughts on “Main 6 Types of Bathtub Drains: How to Choose Best One !”